Show the process of solving each problem. The answer is already provided.   Review Assignment Kinetics Kinetics, the study of unbalanced forces

  Show the process of solving each problem. The answer is already provided.  

Review Assignment Kinetics

Kinetics, the study of unbalanced forces causing motion, can be analyzed by three methods: inertia force or torque (dynamic equilibrium), work and energy, and impulse and momentum.

Consider the following as you complete your assignment:

· For linear motion the inertia force is

· Equal to 
ma

· Acting through the center of gravity

· Opposite in direction to the acceleration 

· For rotational motion the inertia torque is

· Equal to C

· Opposite in direction to the angular acceleration 

· For a plane motion problem such as a rolling cylinder, try to

· Equate or relate linear acceleration to angular acceleration.

· Take moments at the rolling point of contact with the surface.

Chapter 13: Kinetics

· Section: Problems

· 13-1

Determine the acceleration of the 150-lb block in Figure P13–1 if the coefficient of kinetic friction is 0.4.

a = 9.05 ft/s^2 →

· 13-3

A 130-kg cart is accelerated horizontally by a 250-N force pulling at an angle of 20° above horizontal. Neglecting rolling resistance, determine the acceleration of the cart.

a = 1.81 m/s^2

· 13-7

At what maximum acceleration rate can a 500-N test-strength cable lift a 40-kg mass?

a = 2.69 m/s^2 ↑

· 13-8

What force does a 180-lb man exert on the floor of an elevator that is moving downward and decelerating at 15 ft/s2?

264 lb

· 13-20

The coefficient of kinetic friction for mass B in Figure P13–20 is 0.25. Determine the acceleration of mass A if it has a mass of (a) 30 kg and (b) 50 kg.

aA = 0.76 m/s^2 aA = 0

· 13-36

A 1000-kW generator has a 3500-lb rotor that is accelerated from rest to 3600 rpm in 10 seconds. Determine the torque required. Assume the rotor to be a solid cylinder 40 in. in diameter.

T = 5690 lb-ft

· 13-41

A 150-mm-diameter shaft with a mass of 20 kg is rotating at 900 rpm. A pulley mounted on the shaft has a mass moment of inertia of 0.15 kg ⋅ m2. If the shaft and the pulley coast to a stop due to a tangential frictional force of 8lb at the outer radius of the shaft, determine the time required.

58.9 s

image1.jpeg

image2.jpeg

Share This Post

Email
WhatsApp
Facebook
Twitter
LinkedIn
Pinterest
Reddit

Order a Similar Paper and get 15% Discount on your First Order

Related Questions

OL 600 Milestone Three Guidelines and Rubric Global HR, Diversity, Risk Management, and Social Responsibility Overview For this milestone, due in Module

OL 600 Milestone Three Guidelines and Rubric Global HR, Diversity, Risk Management, and Social Responsibility Overview For this milestone, due in Module Seven, you will analyze HR strategic initiatives of managing HR globally, diversity and inclusion, risk management, and social corporate responsibility that impact an organization’s strategic goals. Scenario For this

Practice1 INPUT DATA Forecasted annual sales growth 10% COGS/SALES 55% SG&A/SALES 20% DEPRECIATION/Gross PPE 8% INTEREST RATE 10% TAX

Practice1 INPUT DATA Forecasted annual sales growth 10% COGS/SALES 55% SG&A/SALES 20% DEPRECIATION/Gross PPE 8% INTEREST RATE 10% TAX RATE 35% CASH/SALES Plug ACCOUNT RECEIVABLE/SALES 35% INVENTORY/SALES 85% ACCOUNTS PAYABLE/SALES 14% OTHER CURRENT LIAB/SALES 25% GROSS PPE 70% of sales if Sales <=45000 27000+0.7(Sales-40000) if 45000< Sales <= 50000 38500+0.3(Sales-50000)

Academic Writing Expectations Checklist The faculty will use this checklist to evaluate whether your written responses adhere to the

Academic Writing Expectations Checklist The faculty will use this checklist to evaluate whether your written responses adhere to the conventions of scholarly writing. Review this checklist prior to submitting your Assessment to ensure your writing follows academic writing expectations. Click the links to access OASIS Writing Center resources: Sentence-Level Skills